BRIT NERF Forum Index
Join! (free) SearchFAQMemberlistUsergroupsLog in
Analasis between Homemade breeches and kits for the longshot

 
Reply to topic    BRIT NERF Forum Index » General Nerf Discussion View previous topic
View next topic
Analasis between Homemade breeches and kits for the longshot

Sleeper or a kit
Sleeper
100%
 100%  [ 1 ]
Kit (Alpha)
0%
 0%  [ 0 ]
Total Votes : 1

Author Message
Dino
New Member


Joined: 07 Apr 2017
Posts: 1
Fav. Blaster: Longshot
Location: Saudi Arabia



Post Analasis between Homemade breeches and kits for the longshot  Reply with quote
Sleeper Vs. Alpha! (LS)

I am going to build 2 Longshots one with the alpha and one as a sleeper i want to know the pro's and con's of each, starting with me :
Alpha :
Pro's:
    1. Its a kit so no real work is required with little room for mistakes.
    2. comes with stronger then stock parts.
    3. It shoots stefans so its accurate and reliable.
Cons:
    1. it seems to have a lower power output then sleeper breechs.
    2. only stefans so its restricted in certain wars that most players play with full length darts. (omni will come but it looks like it wont fully seal).
Sleeper:
Pro's:
    1. seems to have a higher output of power.
    2. modularity, Eg. shoots all kinds of darts, changeable barrel length for different springs.
    3. Diy, which means a cheaper build cost and you can make it the way you want.
    4. you can buy these but for a much higher price for what you get then the alpha.
Con's:
    1. Huge space for error, depending on the experience of the maker.
    2. Lower reliability, also depending on the quality of the build.
    3. entry lever is high compared to the alpha which you just need a couple of screw drivers, as you need a bunch of tools and epoxys and know-how as to using them.
   4. might not yield as high precision as manufactured kits with better Tolerances.



Also on FB in the Turf forum : https://www.facebook...ps/blasterguts/
Thu May 18, 2017 11:54 am View user's profile Send private message
OldNoob
Foam Data Collector


Joined: 07 May 2013
Posts: 4886
Fav. Blaster: Xtreme 180 Rapidstrike
Location: In the Boonies



Post Reply with quote
I would build a proper sleeper breech, you can do so for much less than the cost of the kits and all the pusher type kits I have seen so far, indeed anything using an O ring seal, have been junk. They have only made lots of power via huge spring loads and the pre cut barrel means you are stuck with someone else's potentially untested and poorly calculated assumption about barrel length, which may not relate at all to the spring rate you are shooting.
I would also check out the Lipless breech for full length and short darts featured by PSYK. It had minimal deadspace and allowed barrel tuning as well as using printed parts to reduce alignment error.

Most people here are not that interested in longshots or short darts since neither are that prevelant at U.K. games and anything over 130fps can only be used on private land, so I don't know how much input you will get.
We would be pleased to see the results of your mod, especially with some decent FPS figures and a detailed build log. There are a few people interested in the sleeper breech design and there's no detailed build guide on it outside closed groups.

_________________
Big_Poppa_Nerf wrote:

Boff whats the damage? I have spent over 3 times my Nerf budget this month already. Part of me is trying to be a responsible parent/husband/house owner. The other half is just says 'Ahhhh, Screw it!'.
Thu May 18, 2017 12:24 pm View user's profile Send private message Send e-mail
DLO01
New Member


Joined: 09 Aug 2014
Posts: 17
Location: Australia



Post Reply with quote
If you have the skills, know how and time, do a custom sleeper brass breech, from our experience.  I've been using one of our old breeches for years now and its still going strong, still sealing near 100%, still performing and working as expected.  We've had our experiences with 'off the shelf kits' and were disappointed, power is down, your limited to certain length darts, seems like they are untested and unrefined.

So for us.  Go the custom brass breech.  Learns some skills in the trade, its what we do, its our hobby.  Usually the first one is a practice run, you might make mistakes, but from there you are on your way and you can build em as you please.  Enjoy!



_________________
Deano.
BlasterTECH

Check us out at: www.BlasterTECH.com.au
Please like us on Facebook: https://www.facebook.com/blastertech
Specializing in Flywheel Blaster electrical loom kits!
Australian distributor for BSUK quality products!
Thu May 18, 2017 9:27 pm View user's profile Send private message
Display posts from previous:    
Reply to topic    BRIT NERF Forum Index » General Nerf Discussion All times are GMT
Page 1 of 1

 
Jump to: 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Card File  Gallery  Forum Archive
Powered by phpBB © 2001, 2005 phpBB Group
Design by Freestyle XL / Flowers Online.
Create your own free forum | Buy a domain to use with your forum